Sector: Energy production

Hydrogen Project Engineer – Uusimaa

Posted on by Severi Suttinen

Function

We are looking for a Hydrogen Project Engineer to start as soon as possible.

Now you have an unique chance to contribute to the Nordic green transition!

You will work in the owners team in the capital area of Finland.


Responsibilities

  • Project Planning & Scheduling & Cost control & Procurement
  • Negotiations with equipment manufacturers, engineering partners, and other stakeholders
  • You are the right hand of the Project manager


+5 years of experience in:

  • Green Transitions
  • Energy Production
  • Project Development & Management
Continue reading “Hydrogen Project Engineer – Uusimaa”

Commissioning Ops Supervisor 2 – Control Room – Edson, AB

Posted on by Sarah McGrath

Introduction

Dovre Group is pleased to present the following opportunity: Commissioning Ops Supervisor 2 located in Edson, AB.

Continue reading “Commissioning Ops Supervisor 2 – Control Room – Edson, AB”

Commissioning Mechanical/Utility Lead – Dubai

Posted on by Severi Suttinen

Function

    • Manage piping aspects, including Preservation Coordination and Technical Safety Lead Inspection.

    • In addition to being discipline lead act as package engineer for specific packages

    • Ensure that all activates, for which they are responsible, are carried out in conformance with laws and regulations, contractual requirements and the Project Management Plan. In particular health and safety of personnel, natural and working environment and equipment shall be taken care of.

    • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work and specifically for life extension activities of Piping.

    • Work with AIP operations team to assist Contractor to arrange for required condition assessment inspections by contractor and / or OEM.

    • Work with AIP Regulatory Compliance & Verification Lead and Contractors to ensure that required compliance and verification activities in areas of Piping discipline are defined and executed as required.

    • Take lead in ensuring not only Piping but AIP multidiscipline involvement in review of purchase order specifications, RFQs, vendor bid evaluations, bid clarification meetings up to clear recommendation / identification of vendor selection. It is expected that Piping Lead will prepare and maintain an engagement matrix to ensure required amount of involvement.

    • Responsible for assistance with the maintenance of the Approved Vendor List for the Project including for all disciplines. Engage with other discipline leads (Mechanical, EICT, Structural etc.) as needed.

    • Comment on the Piping including arrangement on operability, functionality, accessibility and maintainability to meet requirements in laws, regulations, class, flag and contract.

    • Responsible for IDC comments verification and approval within Piping group, shall conduct team reviews and respond to relevant TQ’s or non-conformances.

    • Prepare Piping technical philosophies, specifications, documents and drawings as required to clearly define the scope of work.

    • Monitor and review Contractor’s Piping activities and deliverables to ensure compliance with all regulatory and contract requirements. Ensure compatibility and functionality of existing and new vessel systems and equipment.

    • Participate in work pack review sessions as well as ensure that all work packs prepared by Contractor are complete in terms of scope definition in relevant areas.

    • Participate in discipline checks, design reviews, HAZIDs, HAZOPs and any other related safety studies.

    • Report to the Construction Manager any delays in progress under his/her area of responsibility.

    • Participate in meetings and inspections as required, worldwide.

    • Coordinate Lessons Learned input to AIP Project Management Team.

    • Close assigned Technical Query (TQ) and other Action Tracker items in PIMS or formal MOM.

    • Collaborate closely with other key disciplines in the Project Management Team. Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

    • Review documentation according to Document Distribution Matrix.

    • Act as discipline lead within the Project Management Team for the work scope of Piping & Layout discipline.

    • Ensure Piping & Layout philosophies and specifications are included and participate and ensure design verification of Piping & Layout engineering work is performed.

    • Participate and follow-up as necessary in technical audits within area of responsibility.

    • Oversee the development of relevant documentation for the Piping & Layout systems.

    • Contribute and assist with review of operational philosophies, systems and processes.

    • Contribute to experience transfer.

    • Give input to the Regulatory Compliance Matrix to ensure legislative, class, flag state, Client specifications and AIP philosophy requirements are incorporated into the proposed design covered by the Piping & Layout systems.

    • Report to the Construction Manager any delay in progressing the engineering deliverables by Contractor for the project scope.

    • Ensures that AIP and Client safety, quality and management standards are implemented and maintained in the development of the Piping systems.

    • Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

    • Ensure good cooperation, communication and alignment between the base organization and the project.

    • Provide necessary assistance for interface coordination.

    • Review and comment plans for Factory Acceptance Tests (FAT) for all Piping equipment and participate in tests as necessary.

    • Ensures satisfactory results of FAT and report to the Construction Manager in case of discrepancies.

    • Liaison and monitor daily construction activities (fabrication, installation, testing activies, insulation etc) with subcontractors/vendor at shipyard.

    • Other roles (and role descriptions) as and when required.

    Qualifications and Experience

    • Technical education on bachelor level or higher within working area.

    • Minimum 15 years’ experience within working area.

    • Recent experience of working on FPSO.

    • Recent experience of working on similar role on UK North Sea projects will be an advantage.

    • Recent relevant experience in middle east / south east Asian shipyards is an advantage.

    • Strong leadership & interpersonnel skills applied to a multidisciplined project team.

    • Diplomacy & assertiveness

    • Organised, Systematic & Flexible

    • English – fluent written and verbal skills

Continue reading “Commissioning Mechanical/Utility Lead – Dubai”

Surface Protection Lead – Dubai

Posted on by Severi Suttinen

Function

  • Ensure good cooperation, communication and alignment between the base organization and the project.

  • Ensure that Surface treatment and Insulation activities for all disciplines related to Hull construction are planned, performed and documented in accordance with the project specifications.

  • Ensure that relevant activities within the discipline are within the company framework and in conformance with contract requirements, Project Execution Plan, and relevant laws and regulations. The health and safety of personnel, natural and working environment and equipment shall be taken care of.

  • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work and specifically for life extension activities of surface preparation.

  • Work with AIP operations team to assist Contractor to arrange for required condition assessment inspections by contractor and / or OEM.

  • Participate in work pack review sessions as well as ensure that all work packs prepared by Contractor are complete in terms of scope definition in relevant areas.

  • Participate in design reviews, HAZID’s, HAZOP’s and any other related safety studies.

  • Report to the Construction Manager any delays in progress under his/her area of responsibility.

  • Report to the Construction Manager any failure of design or gap between the delivered solution and the contract requirement, and ensure corrective actions are implemented.

  • Participate in meetings and inspections as required, worldwide.

  • Coordinate Lessons Learned input to AIP Project Management Team.

  • Close assigned Technical Query (TQ) and other Action Tracker items in PIMS or formal MOM.

  • Collaborate closely with other key disciplines in the Project Management Team. Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

  • Participate and follow-up as necessary in technical audits within area of responsibility.

  • Contribute to ensure site HSE standard and compliance.

  • Follow-up and ensure fabrication progress and quality in respective discipline.

  • Monitoring of Contractors surface protection and insulation activities within all disciplines, ensure that all required qualifications are performed

  • Supervise Surface protection and Insulation inspectors in site team. (if any)

  • Monitor that Contractor construction and quality control departments follow the required procedures, specification and standards to ensure that all quality requirements are met and that project specifications are implemented throughout construction.

  • Ensure that fabrication documentation is issued by Contractor in accordance with requirements.

  • Actively work with Contractor to ensure that mechanical completion is achieved with a minimum of punch listed items.

  • Participate in area/system punch in critical areas.

  • Follow up and verify Contractors closing of punch items as required.

  • Assist Contractor with discipline field engineering / construction details.


Qualifications and Experience

  • Technical education on bachelor level or higher within working area.

  • Minimum 10 years of relevant experience within surface preparation and experience of at least two recent projects as surface preparation lead.

  • Qualification to FROSIO or ICorr inspector level II or III for insulation.

  • Preferably qualification to NS476, Inspector level III or certified as NACE coating inspector level III or similar It is crucial that the candidate has a proactive mindset and focus on supporting Contractor success.

  • Recent experience of working on modification projects and / or FPSO redeployment is strongly desired.

  • Recent experience of working on similar role on UK North Sea projects will be an advantage.

  • Strong leadership & interpersonnel skills applied to a multidisciplined project team.

  • Recent relevant experience in middle east / southeast Asian shipyards is an advantage

  • Diplomacy & assertiveness

  • Organised, Systematic & Flexible

  • English – fluent written and verbal skills

Continue reading “Surface Protection Lead – Dubai”

Structural Lead – Dubai

Posted on by Severi Suttinen

Function

  • Manage structural aspects, including Preservation Coordination and Technical Safety Lead Inspection.

  • In addition to being discipline lead act as package engineer for specific packages

  • Ensure that all activates, for which they are responsible, are carried out in conformance with laws and regulations, contractual requirements and the Project Management Plan. In particular health and safety of personnel, natural and working environment and equipment shall be taken care of.

  • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work and specifically for life extension activities of structure.

  • Work with AIP operations team to assist Contractor to arrange for required condition assessment inspections by contractor and / or OEM.

  • Work with AIP Regulatory Compliance & Verification Lead and Contractors to ensure that required compliance and verification activities in areas of Structural discipline are defined and executed as required.

  • Take lead in ensuring not only Structure but AIP multidiscipline involvement in review of purchase order specifications, RFQs, vendor bid evaluations, bid clarification meetings up to clear recommendation / identification of vendor selection. It is expected that Structural Lead will prepare and maintain an engagement matrix to ensure required amount of involvement.

  • Responsible for assistance with the maintenance of the Approved Vendor List for the Project including for all disciplines. Engage with other discipline leads (Mechanical, EICT, Piping etc.) as needed.

  • Comment on the Structural including arrangement on operability, functionality, accessibility and maintainability to meet requirements in laws, regulations, class, flag and contract.

  • Responsible for IDC comments verification and approval within Structure group, shall conduct team reviews and respond to relevant TQ’s or non-conformances.

  • Prepare Structural technical philosophies, specifications, documents and drawings as required to clearly define the scope of work.

  • Monitor and review Contractor’s Structural activities and deliverables to ensure compliance with all regulatory and contract requirements. Ensure compatibility and functionality of existing and new vessel systems and equipment.

  • Participate in work pack review sessions as well as ensure that all work packs prepared by Contractor are complete in terms of scope definition in relevant areas.

  • Provide technical support within the profession across assets for operation support, studies, tenders, modifications and projects. This includes being familiar with relevant rules, regulations and standards applicable for the area of responsibility:

  • Structural Strength; Hull and topside

  • Other structural elements

  • Ship technical marine systems

  • Project calculations and engineering work

  • Participate in discipline checks, design reviews, HAZIDs, HAZOPs and any other related safety studies.

  • Report to the Construction Manager any delays in progress under his/her area of responsibility.

  • Participate in meetings and inspections as required, worldwide.

  • Coordinate Lessons Learned input to AIP Project Management Team.

  • Close assigned Technical Query (TQ) and other Action Tracker items in PIMS or formal MOM.

  • Collaborate closely with other key disciplines in the Project Management Team. Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

  • Review documentation according to Document Distribution Matrix.

  • Act as discipline lead within the Project Management Team for the work scope of Structural discipline.

  • Ensure Structural philosophies and specifications are included and participate and ensure design verification of structure engineering work is performed.

  • Participate and follow-up as necessary in technical audits within area of responsibility.

  • Oversee the development of relevant documentation for the Structural works.

  • Contribute and assist with review of operational philosophies, systems and processes.

  • Contribute to experience transfer.

  • Give input to the Regulatory Compliance Matrix to ensure legislative, class, flag state, Client specifications and AIP philosophy requirements are incorporated into the proposed design covered by the Strucural works.

  • Report to the Construction Manager any delay in progressing the engineering deliverables by Contractor for the project scope.

  • Ensures that AIP and Client safety, quality and management standards are implemented and maintained in the development of the Structural works.

  • Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

  • Ensure good cooperation, communication and alignment between the base organization and the project.

  • Provide necessary assistance for interface coordination.

  • Review and comment plans for Factory Acceptance Tests (FAT) for all structural related works and participate in tests as necessary.

  • Ensures satisfactory results of FAT and report to the Construction Manager in case of discrepancies.

  • Liaison with Classification and Regulatory bodies.

  • Maintain and develop the Company’s competence within the discipline.

  • Participate in execution of studies, tenders, modifications, FEEDs and execution of projects.

  • Liaison and monitor daily construction activities with subcontractors/vendor at shipyard.

  • Other works within the area of marine disciplines

  • Other roles (and role descriptions) as and when required

Qualifications and Experience

  • Technical education on bachelor level or higher within working area.

  • Minimum 10 years’ experience within working area.

  • Recent experience of working on modification projects and / or FPSO redeployment is strongly desired.

  • Recent experience of working on similar role on UK North Sea projects will be an advantage.

  • Recent relevant experience in middle east / south east Asian shipyards is an advantage.

  • Strong leadership & interpersonnel skills applied to a multidisciplined project team.

  • Diplomacy & assertiveness

  • Organised, Systematic & Flexible

  • English – fluent written and verbal skills

Continue reading “Structural Lead – Dubai”

Commissioning Systems Lead – Dubai

Posted on by Severi Suttinen

Function


The Systems Lead reporting to Commissioning Manager will be an integral part of AIP Project Management Team, working collaboratively within the AIP organization, systems, procedures, and methods. This role has been identified as a “Key Position” within Rosebank project organization of AIP.


The Commissioning Systems Lead is responsible for monitoring the quality of discipline related documentation on design solution and all engineering activities within EPC towards all disciplines. The Commissioning Systems Lead shall ensure that all necessary information to execute commissioning and start-up is made available from all Contractor side

Commissioning Systems Lead shall ensure that the completion system (PIMS) has the necessary data available to execute system and sub-system definition, have P&ID ready for system boundary mark-up, and information available to develop a well-functioning PIMS

  • The Commissioning Systems Lead shall also be a part of review all FAT- and SAT-procedure and vendor commissioning procedures. A close relation with the Engineering, Construction and MC will be required to ensure alignment on plans and progress. Key activities to align will be “The Driving Force” in count down meetings and contribute to ensure Mechanical Completion activities are executed in accordance with Altera and Contractor requirements

Accountabilities

  • Monitor and coordinate Mechanical Completion and Commissioning activities

  • Ensure that relevant activities within the disciplines are within the company framework and in conformance with contract, Yard Execution Plan, and relevant regulations. The health and safety of personnel, natural and working environment and equipment shall be taken care of.

  • Ensure good cooperation, communication and alignment between the base organization and the project.

  • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work definition.

  • Work with JV Yard organization, Altera Construction Team and Client to ensure compliance and verification activities required.

  • Participate in review of previous lessons learned and the incorporation of relevant lessons learned into Completion process

  • Follow-up of interface between all disciplines onboard the FPSO

  • Monitor and follow-up contractor and Suppliers ITPs

  • Contribute to a seamless handover transition to Commissioning

  • Verify with System Responsible Engineer that systems are ready for Commissioning

  • Coordinate with Contractor to meet Handover dates to Commissioning

  • Assist in planning/execution of commissioning activities in accordance with commissioning plans and procedures

  • Assist and monitor preparations of commissioning queries

  • Contribute to the Management of Change process and to project risk workshop. Identify and follow up relevant risk and mitigating actions

  • Assist in arranging Vendor support for commissioning activities

  • Coordinate execution and organization of all commissioning punch when required.

  • Secure that the project has correct capacity and competence to execute and verify commissioning punch.

  • Assist in the development of the commissioning “punch killing” and clearance schedule.

  • Verify with System Responsible Engineer that systems are ready for RFOC

  • Participate for IDC comments verification and approval within commissioning team

  • Prepare commissioning dossiers and procedures

  • Participate in work pack review sessions as well as work packs preparation

  • Report to Commissioning Manager any delays in progress under his/her area of responsibility.

  • Participate in meetings, inspections and tri-party walks

  • Collaborate closely with other key disciplines in the Engineering Team. Call off assistance from discipline resources.

  • Other duties as required by the Commissioning Manager

Qualifications and Experience

  • Technical education on Bachelor level or equivalent experience

  • Minimum 15 years of relevant experience within operation, project execution and commissioning

  • Extensive experience with execution of Construction and MC activities both from Contractor and Client organizations as well as strong leadership qualities.

  • Experience as Commissioning Coordinator or similar

  • Experience in FPSO redeployment is strongly desired.

  • Recent experience of working in a similar role on UK North Sea projects will be an advantage.

  • Leadership & interpersonal skills applied to a multidisciplined project team

  • Recent relevant experience in middle east / southeast Asian shipyards is an advantage

  • Organized, Systematic & Flexible

  • English – fluent written and verbal skills

Continue reading “Commissioning Systems Lead – Dubai”

ICT/SAS Lead – Dubai

Posted on by Severi Suttinen

Function

  • The Commissioning ICT (Instrument/Control/Telecom) & SAS (Safety and Automation System) Lead is responsible for monitoring the quality of discipline related documentation on design solution and all engineering activities within EPC towards ICT/SAS disciplines. The Commissioning ICT/SAS Lead shall ensure that all necessary information to execute commissioning and start-up is made available from all Contractor side.

  • Commissioning ICT/SAS Lead shall ensure that the completion system (PIMS) has the necessary data available to execute system and sub-system definition, system boundary mark-up, and information available to develop commissioning procedures.

  • The Commissioning ICT/SAS Lead shall also review all FAT- and SAT-procedure and vendor commissioning procedures.

  • Manage Commissioning ICT/SAS team.

  • Ensure that relevant activities within the discipline are within the company framework and in conformance with contract requirements, Project Execution Plan, and relevant laws and regulations.

  • Ensure good cooperation, communication and alignment between the base organization and the project.

  • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work definition.

  • Work with AIP Regulatory Compliance & Verification Lead and Contractors to ensure that required compliance and verification activities in areas of ICT/SAS discipline are defined and executed as required.

  • Review and comment documents for ICT/SAS discipline as prepared by Contractor.

  • Monitor and review Contractor’s ICT/SAS discipline activities and deliverables to ensure compliance with all regulatory and contract requirements. Ensure compatibility and functionality of existing and new vessel systems and equipment.

  • Oversee the development of relevant documentation for the ICT & SAS systems.

  • Participate in work pack review sessions as well as ensure that all work packs prepared by contractor are complete in terms of scope definition in relevant areas

  • Review comments from Certifying Authority on design of the ICT/SAS systems and assist in resolving issues.

  • Review documentation according to Document Distribution Matrix.

  • Participate in design reviews, HAZID’s, HAZOP’s and any other related safety studies.

  • Participate in meetings and inspections as required, worldwide.

  • Close assigned TQ’s and other actions items in PIMS or formal MOM.

  • Collaborate closely with other key disciplines in the FEED Management Team.

  • Review and comment plans for Factory Acceptance Tests (FAT) for all ICT/SAS equipment and participate in tests as necessary.

  • Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

  • Report to the Commissioning Manager any delays in progress under his/her area of responsibility.

  • Report to the Commissioning Manager any failure of design or gap between the delivered solution and the contract requirement, and ensure corrective actions are implemented.


Qualifications and Experience

  • Technical education on Masters level or higher within EICT Minimum 15 years of relevant experience within ICT/SAS discipline and experience of at least two recent projects as ICT/SAS discipline lead.

  • SAS Engineering experience in addition to long commissioning experience will be considered an advantage

  • Recent experience of working on modification projects and / or FPSO redeployment is strongly desired.

  • Strong leadership & interpersonnel skills applied to a multidisciplined project team

  • Recent relevant experience in middle east / south east Asian shipyards is an advantage

  • Diplomacy & assertiveness

  • Organised, Systematic & Flexible

  • English – fluent written and verbal skills

Continue reading “ICT/SAS Lead – Dubai”

Mechanical Lead – Dubai

Posted on by Severi Suttinen

Function

  • Manage the Mechanical team, including Preservation Coordination and Technical Safety Lead Inspection.

  • In addition to being discipline lead act as package engineer for specific packages

  • Ensure that relevant activities within the discipline are within the company framework and in conformance with contract requirements, Project Execution Plan, and relevant laws and regulations. The health and safety of personnel, natural and working environment and equipment shall be taken care of.

  • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work and specifically for life extension activities of mechanical equipment.

  • Work with AIP operations team to assist Contractor to arrange for required condition assessment inspections by contractor and / or OEM.

  • Work with AIP Regulatory Compliance & Verification Lead and Contractors to ensure that required compliance and verification activities in areas of mechanical discipline are defined and executed as required.

  • Take lead in ensuring not only mechanical but AIP multidiscipline involvement in review of purchase order specifications, RFQs, vendor bid evaluations, bid clarification meetings up to clear recommendation / identification of vendor selection. It is expected that Mechanical lead will prepare and maintain an engagement matrix to ensure required amount of involvement.

  • Responsible for maintaining Approved Vendor List for the Project including for all disciplines. Engage with other discipline leads (EICT; Piping, Structural etc.) as needed.

  • Review and comment documents mechanical discipline documents as prepared by Contractor.

  • Comment the Mechanical design including arrangement on operability, functionality, accessibility and maintainability to meet requirements in laws, regulations, class, flag and contract.

  • Responsible for IDC comments verification and approval within Mechanical engineering group, shall conduct team reviews and respond to relevant TQ’s or non-conformances.

  • Prepare Mechanical technical philosophies, specifications, documents and drawings as required to clearly define the scope of work.

  • Monitor and review Contractor’s Mechanical activities and deliverables to ensure compliance with all regulatory and contract requirements. Ensure compatibility and functionality of existing and new vessel systems and equipment.

  • Participate in work pack review sessions as well as ensure that all work packs prepared by contractor are complete in terms of scope definition in relevant areas.

  • Review comments from Certifying Authority on design of the Mechanical systems and assist in resolving issues.

  • Participate in design reviews, HAZID’s, HAZOP’s and any other related safety studies.

  • Report to the Construction Manager any delays in progress under his/her area of responsibility.

  • Report to the Construction Manager any failure of design or gap between the delivered solution and the contract requirement, and ensure corrective actions are implemented.

  • Participate in meetings and inspections as required, worldwide.

  • Coordinate Lessons Learned input to AIP Project Management Team.

  • Close assigned Technical Query (TQ) and other Action Tracker items in PIMS or formal MOM.

  • Collaborate closely with other key disciplines in the Project Management Team. Call off assistance from discipline resources within area of responsibility as needed in order to keep quality and progress.

  • Ensure good cooperation, communication and alignment between the base organization and the project.

  • Liaison and monitor daily construction activities with subcontractors/vendor at shipyard.

  • Other roles (and role descriptions) as and when required.


Qualifications and Experience

  • Technical education on bachelor level or higher within Mechanical Engineering.

  • Recent experience of LP/HP compressor, thruster, pumps, boiler, generator, cooler, separator, HPU etc.

  • Minimum 15 years of relevant experience within Mechanical package engineering discipline and experience of at least two recent projects as Mechanical discipline lead.

  • Recent experience of working on modification projects and / or FPSO redeployment is strongly desired.

  • Recent experience of working on similar role on UK North Sea projects will be an advantage.

  • Strong leadership & interpersonnel skills applied to a multidisciplined project team.

  • Recent relevant experience in middle east / southeast Asian shipyards is an advantage

  • Diplomacy & assertiveness

  • Organised, Systematic & Flexible

  • English – fluent written and verbal skills


Continue reading “Mechanical Lead – Dubai”

Mechanical/Utility Lead – Dubai

Posted on by Severi Suttinen

Function

  • The Process Lead reporting to Commissioning Manager will be an integral part of AIP Project Management Team, working collaboratively within the AIP organization, systems, procedures, and methods. This role has been identified as a “Key Position” within Rosebank project organization of AIP.

    The Commissioning Process Lead is responsible for monitoring the quality of discipline related documentation on design solution and all engineering activities within EPC towards Process disciplines. The Commissioning Process Lead shall ensure that all necessary information to execute commissioning and start-up is made available from all Contractor side

    Commissioning Process Lead shall ensure that the completion system (PIMS) has the necessary data available to execute system and sub-system definition, have P&ID ready for system boundary mark-up, and information available to develop commissioning procedures.

    The Commissioning Process Lead shall also review all FAT- and SAT-procedure and vendor commissioning procedures. Commissioning Process Lead shall also review vendor preservation procedures. A close relation with the Engineering Process Lead will be required to ensure alignment on plans and progress. Key activities to align will be process simulations, PFDs/UFDs, P&IDs, process data sheets, process safety report, process calculations.

    Accountabilities

    • Manage commissioning process team

    • Ensure that relevant activities within the discipline are within the company framework and in conformance with contract, Yard Execution Plan, and relevant regulations. The health and safety of personnel, natural and working environment and equipment shall be taken care of.

    • Ensure good cooperation, communication and alignment between the base organization and the project.

    • Work with AIP operations team as well as client to ensure clear guidance and clarifications are provided with regards to scope of work definition.

    • Work with JV Yard organization, Altera Construction Team and Client to ensure compliance and verification activities required.

    • Review and comment documents for process discipline

    • Responsible for IDC comments verification and approval within commissioning team

    • Prepare commissioning dossiers and procedures

    • Participate in work pack review sessions as well as work packs preparation

    • Participate in design reviews, HAZID’s, HAZOP’s and any other related safety studies.

    • Report to Commissioning Manager any delays in progress under his/her area of responsibility.

    • Participate in meetings, inspections and tri-party walks

    • Collaborate closely with other key disciplines in the Engineering Team. Call off assistance from discipline resources.

    • Other duties as required by the Commissioning Manager

    Qualifications and Experience

    • Technical education on Bachelor level or equivalent experience

    • Minimum 15 years of relevant experience within operation, project execution and commissioning

    • Experience in FPSO redeployment is strongly desired.

    • Recent experience of working in a similar role on UK North Sea projects will be an advantage.

    • Leadership & interpersonal skills applied to a multidisciplined project team

    • Recent relevant experience in middle east / southeast Asian shipyards is an advantage

    • Organized, Systematic & Flexible

    • English – fluent written and verbal skills

Continue reading “Mechanical/Utility Lead – Dubai”

Construction Operations Manager – Hydrogen – NS/NL

Posted on by Sarah McGrath

Introduction

Dovre Group is pleased to present the following opportunity: Construction Operations Manager – Hydrogen. Our client is currently looking for candidates in Nova Scotia or Newfoundland, Canada.

Continue reading “Construction Operations Manager – Hydrogen – NS/NL”